Excavator Components

This part is using in Planer Machine area,the raw material is ADC12.The main processes of this Machinery Parts are die casting,CNC Milling,CNC Turning. Die casting is a manufacturing process used to produce geometrically complex metal parts through the injection of molten metal into a mold cavity under high pressure. While it offers many advantages, there are also certain restrictions and limitations associated with the die casting process: Material Selection: Die casting is best suited for...

This part is using in LED Streetlight area, the raw material of this Lighting Parts is YL102. The main processes are die casting,deburring,Shot Blasting,CNC Milling. We can provide available engineer consultation to the design for production improvement and cost saving. Depending on the product specification, we use different methods of aluminium die casting. The combination of die casting and CNC machining is a common approach in the production of LED light parts, resulting in high-quality...

This part is using in LED Streetlight area,the raw material is ADC12. The main processes are die casting,CNC Milling,CNC Turning,Spray Coating. We can provide available engineer consultation to the design for production improvement and cost saving. Depending on the product specification, we use different methods of aluminium die casting. The cold chamber die casting machines are used for casting alloys with high melting points such as aluminum, zinc, etc. Therefore, aluminum die casting is done...

This part is using in LED Underwater Light area,Its raw material is ADC12.The main processes of this Lighting Parts are die casting,CNC Milling. Different alloy materials have varying flow characteristics when heated and injected into molds. Mold flow analysis can assist in choosing the most appropriate material for a specific design, considering factors such as viscosity, melting temperature, and shrinkage behavior.This ensures that the chosen material is well-suited for the intended...

This part is using in LED Down Light area,the raw material is ZAMARK3.The main processes are die casting,CNC Milling,CNC Turning,Spray Coating.We invest in state-of-the-art technology and equipment to remain at the forefront of the industry. Our modern facilities empower us to optimize the casting process, resulting in precise, high-quality parts with minimal defects. The integration of automation and advanced control systems ensures consistency and reduces production time, making us a reliable...

This part is using in LED Down Light area,Its raw material is YL102.The main processes are die casting,CNC Milling,CNC Turning.CNC milling and CNC turning are complementary machining processes that serve different purposes. CNC milling is used for creating complex shapes and features, while CNC turning is focused on producing cylindrical parts with rotational symmetry. We often use both processes in tandem to produce intricate parts that require a combination of milled and turned features.The...

This part is using in LED Down Light area, the raw material is ADC12. The main processes are die casting,CNC Milling,CNC Turning. Die-casting LED downlights made of raw material ADC12 typically refer to downlight fixtures whose housings are manufactured using ADC12 aluminum alloy as the primary raw material. ADC12 is a common aluminum alloy used in die-casting processes for a wide range of applications, including LED lighting fixtures. Here's a bit more detail about LED downlights made from...

This part is using in Valve,the raw material of this Machinery Parts is ADC12. The main processes of this Valve Part are die casting,Shot Blasting,CNC Milling. Mold Material:SKD61, H13 Mold Cavity:Single or multiple Single or multiple:50K shots Product Material: 1) Aluminum alloy ADC10, ADC12, A360, A380, A413, A356 2) Zinc alloy 3#, 5#, 8# Surface Treatment: 1) Polishing, Sandblasting, Painting, Powder coating, Galvanizing, Chrome plating, Spray coating, Anodizing 2) Polishing+ zinc...

This part is using in cabinet,the raw material is YL102. The main processes of this Cabinet Hardware are die casting,CNC Milling,Spray Coating. Zinc alloys are widely used in the die casting process due to their excellent combination of properties, ease of casting, and versatility. The die casting process involves injecting molten metal into a mold cavity under high pressure to create complex and precise shapes. Advantages of Zinc Alloys for Die Casting: Castability: Zinc alloys have low...

This part is using in cabinet,the raw material is YL102.The main processes are die casting,CNC Milling,CNC Turning.YL102 is a specialized aluminum alloy primarily used in the aerospace industry for applications requiring high strength, durability, and excellent corrosion resistance. It is a part of the 2000 series aluminum alloys, which are alloyed with copper as the main strengthening element. Applications: Due to its outstanding strength and corrosion resistance, YL102 is predominantly used...

This part is using in motor,the raw material of this Machinery Parts is A356. The main processes of this Low-Pressure Casting Parts are Low-pressure casting,T6 Treatment,Shot Blasting,CNC Turning. Low pressure die casting is a manufacturing process used to produce high-quality metal components with complex shapes. It involves injecting molten metal into a reusable steel mold, also known as a die, under low pressure. The process starts with the preparation of the die, which is preheated to a...

This part is used in Excavator lighting system, raw material is AlSi10Mg.The main processes of this Excavator Components are die casting,CNC Turning,Anodizing. Aluminum die castings are lightweight and able to withstand the highest operating temperatures of all die cast alloys. Aluminum Alloy Characteristics: High operating temperatures Outstanding corrosion resistance Lightweight Very good strength and hardness Good stiffness and strength-to-weight ratio Excellent EMI and RFI shielding...

This part is using in Excavator,the raw material of this Machinery Parts is YL101.The main processes of this Excavator Components are die casting,CNC Milling. Why choose us ? 1. High skilled and well-trained working team under good management environment. 2. Quick response and support for any inquiries. 3. Over 10 years professional manufacture experience to ensure high quality of your products. 4. Large and strong production capacity to meet your demand. 5. High Quality standard and hygienic...

This part was used in Excavator Cooling system, raw material is A380. The main production process of this Excavator Components are die casting, CNC Milling, shot blasting, clean, package and deleivery. Die casting is an industrial casting process for manufacturing cast parts of aluminum, zinc, magnesium or brass. The molten metal is pressed under high pressure into the die where it hardens and is then automatically ejected. A die casting diecan contain several cavities. Depending on the die,...

This part was used in Excavator cooling system, raw material is ADC12. The production process of this Machinery Parts is die casting, CNC Milling, shot blasting, cleaning, package and delivery. Basic Info Standard: GB Certification: ITS16949 Payment Terms: T/T MOQ: 1000 Pieces Lead Time: around 35 Days After Deposit Service: OEM /ODM as Customers drawings Transport Package: Carton/Pallet Specification: customized size customers′ drawing Here's the information of casting process 1, Aluminium die...

This part is using in Excavator,the raw material is ADC12.The main processes are die casting,CNC Milling.The Control Measure of this Excavator Components mainly included Incoming Material Test, First Article inspection, Routing inspection,Final item inspection, and Outgoing quality control.The Inspection Equipment mainly included CMM, Caliper, Plug Gage, Screw Gauge. Essential details Place of Origin:Ningbo,Zhejiang,China Product name:Aluminum Die Casting Excavator Cooling Parts Service:OEM ODM...

This part is using in Tipper,the raw material of this Tipper Parts is ADC12.The main processes of this Engineering Vehicle Parts are die casting,CNC Milling,Polishing,Packing,Shipment.The die casting process is environmentally friendly in three major ways – it uses less waste, offers high accuracy, and long part life. The most commonly die cast alloy, and one of the most abundant in the world, is aluminum. The physical and mechanical properties of aluminum make it an ideal choice for many...

This part is using in Bulldozer,the raw material is YL102.The main processes are die casting,CNC Milling,CNC Turning,Shot Blasting,Electrophoresis.In the die casting process,higher specific pressure is required, so that higher filling speed can be obtained.which is beneficial for alloy to overcome mold filling resistance.and effectively fill each part of the cavity.The Casting General Tolerance is Grade GB-CT4.The CNC machining work is finished on high precision machining center, we used...

This part is using in Bulldozer,the raw material is A380.The main processes of this Bulldozer Components are die casting,CNC Milling,CNC Turning,Shot Blasting,Spray Coating. There are quite a few methods to assemble individual die cast parts made from aluminum or zinc. These methods include: Adhesive bonding Attachment systems External threads Forming or self-cutting fasteners Injected Metal Assembly (IMA) Inserts Interference fits Threaded fasteners Injected Metal Assembly (IMA) The IMA...

This part is using in Bulldozer,the raw material is ADC12.The main processes are die casting,CNC Milling,Shot Blasting,Spray Coating, clean, package and delivery. Tooling Leadtime: around 8 weeks Tooling Lifetime:around 50000 shots Weight per unit:Can cast from 10g to 5kgs per piece Tolerance:+/-0.05mm (secondary machining is available for tight tolerance) Materials Applied:ADC10,ADC12, A380, 383, B390 (YL117), YL112, YL104 Casting Process: 1)Aluminum Die Casting 2) Machining: CNC turning,...